General statistics, Physical interface, Network interface – Farallon Communications R9100 User Manual

Page 122: General statistics -4

Advertising
background image

12-4 User’s Reference Guide

General Statistics

To go to the General Statistics screen, select General Statistics and press Return. The General Statistics
screen appears.

The General Statistics screen displays information about data traffic on the Netopia R9100’s data por ts. This
information is useful for monitoring and troubleshooting your LAN. Note that the counters roll over at their
maximum field width, that is, they restar t again at 0.

Physical Interface

The top left side of the screen lists total packets received and total packets transmitted for the following data
por ts:

Ethernet Hub

Aux Async or LocalTalk (if the optional AppleTalk feature set is installed)

SDSL 1

Network Interface

The bottom left side of the screen lists total packets received and total packets transmitted for the following
protocols:

IP (IP packets on the Ethernet)

IPX (IPX packets on the Ethernet) if IPX is enabled

AppleTalk (AppleTalk packets on Ethernet using EtherTalk Phase II if the optional AppleTalk feature set is
installed)

General Statistics

Phys I/F---------Rx Bytes---Tx Bytes---Rx Pkts---Tx Pkts----Rx Err----Tx Err
Ethernet Hub 123456789 123456789 12345678 12345678 12345678 12345678
Aux Async 123456789 123456789 12345678 12345678
Ethernet Wan1 123456789 123456789 12345678 12345678
Unused 2
Console 123456789 123456789

Network----------Rx Bytes---Tx Bytes---Rx Pkts---Tx Pkts----Rx Err----Tx Err
IP 123456789 123456789 12345678 12345678 12345678 12345678
IPX 123456789 123456789 12345678 12345678 12345678 12345678
AppleTalk 123456789 123456789 12345678 12345678

Advertising