Farallon Communications R9100 - Manual (Page 54)

7-4 User’s Reference Guide
The Main Menu appears.
2. Select the first item on the Main Menu list, Easy Setup. Press Return to bring up the Easy Setup menu
screen.
3. Press the Down arrow key until the editable field labelled Local WAN IP Address is highlighted.
4. Type the IP Address your ISP gave you. Press Return. The next field Local WAN IP Mask will appear.
5. Type the Subnet Mask your ISP gave you. Press Return.
6. Press the Down arrow key until you reach NEXT SCREEN. Press Return to bring up the next screen.
7. Press the Down arrow key until the editable field labelled Domain Name is highlighted.
8. Type the Domain Name your ISP gave you. Press Return. The next field Primary Domain Name Server will
be highlighted.
9. Type the Primar y Domain Name Ser ver address your ISP gave you. Press Return. A new field Secondary
Domain Name Server will appear. If your ISP gave you a secondar y domain name ser ver address, enter it
here. Press Return until the next field Default IP Gateway is highlighted.
10. Enter the Default IP Gateway address your ISP gave you. Press Return.
11. Press the Down arrow key until you reach NEXT SCREEN. Press Return.
12. Do this again, through the next two screens until you reach RESTART DEVICE. When RESTART DEVICE is
highlighted, press Return. When prompted, select CONTINUE, and press Return.
The router will restar t and your configuration settings will be activated. You can then Exit or Quit your Telnet
application.
For more Easy Setup options see “More Easy Setup options” on page 7-5 .
Netopia R9100 v4.3
Easy Setup...
WAN Configuration...
System Configuration...
Utilities & Diagnostics...
Statistics & Logs...
Quick Menus...
Quick View...
Your Baud Rate has been changed to 57600
You always start from this main screen.