Farallon Communications R9100 - Manual (Page 128)

12-10 User’s Reference Guide
State: Displays the state of the specified route, based on the frequency of Routing Table Maintenance Protocol
(RTMP) packets received for the route. The state can be Good, Suspect, or Bad. AppleTalk routers regularly
exchange RTMP packets to update AppleTalk routing information.
Next Rtr Addr.: Displays the DDP or IP address of the next hop for the specified route. A DDP address is
displayed if the router shown is on the local AppleTalk network. DDP address means that a connection to the
next-hop router is by a native AppleTalk network (e.g.: LocalTalk or EtherTalk Phase II). An IP address is
displayed if the Netopia R9100 is connected to the router shown using AURP. IP address means a connection
transpor ts over AURP (AppleTalk encapsulated IP).
Pkts Fwded: The number of packets sent to the router shown.
Served IP Addresses
You can view all of the IP addresses currently being ser ved by the Netopia R9100 Ethernet Router from the
Served IP Addresses screen.
From the Statistics & Logs menu, select Served IP Addresses. The Ser ved IP Addresses screen appears.
To manage DHCP leases, select Lease Management in this screen.
Served IP Addresses
-IP Address-------Type----Expires--Client Identifier--------------------------
----------------------------------SCROLL UP-----------------------------------
192.168.1.100 DHCP 00:36 EN: 00-00-c5-4a-1f-ea
192.168.1.101 DHCP 00:58 EN: 08-00-07-16-0c-85
192.168.1.102
192.168.1.103
192.168.1.104
192.168.1.105
192.168.1.106
192.168.1.107
192.168.1.108
192.168.1.109
192.168.1.110
192.168.1.111
192.168.1.112
192.168.1.113
---------------------------------SCROLL DOWN----------------------------------
Lease Management...
EN = Ethernet Address; AT = AppleTalk Address; CP = Profile Name; HX = hex