Falcon Graphics RJ-6000 Series - Manual (Page 27)

Step 3
Place the main unit on the stand with the front towards the locking castors on
the stand.
Step 4
Fasten the main unit to the stand using hexagonal socket head bolts (short)
through the holes on both sides of the stand.
Step 5
Peel off the white tapes holding the
cover and waste liquid box.
Step 6
Undo the wing screw holding the print-
ing table and remove the head fasten-
ing fitting. Be careful not to drop the
wing screw inside the printer. Peel off
the white tape holding the cutter sec-
tion.
26 RJ-6000 Series USER GUIDE Basic Edition
Assembling the Printer
Hexagonal
Socket
Head Bolt
(short)
Hexagonal Socket
Head Bolt (short)
Tape
Tape
Head Fastening
Fitting
Wing Screw