Falcon Graphics RJ-6000 Series - Manual (Page 8)

RJ-6000 Series is a precision device. When you use it, be careful
of the following.
• Don't use the printer in extreme heat, cold or humidity.
• Covers secured by screws must not be opened other than parts
noted in this manual.
• Don't have a radio or television nearby as the printer may
cause interference.
• Don't connect the printer cable to the same power source as an
appliance that generates electrical noise.
• This printer uses 100 to 120 V, or 200 to 240 V AC power. Don't
use it with power other than 100 to 120 V, or 200 to 240 V AC.
• Be sure to use a power source with an earth connection.
• Avoid placing objects on top of the printer or subjecting it to
severe vibration or impact.
• Don't tilt or shake the printer when you move it. This may
cause the ink to spill or the mechanism to malfunction. If tilting
is unavoidable, contact your local Mutoh dealer.
• Don't wipe the printer with thinners or benzene.
• Be sure to use RJ-6000 Series special cartridges (the printer
will be damaged if an ink other than a special cartridge is
used.)
• If the printer makes a strange noise or acts abnormally, refer to
"When trouble strikes" on page 91 and contact your local
Mutoh dealer.
• There is no question about the safety of the ink but since it is
mildly toxic it should be kept out of the reach of children.
Using the Printer
7 RJ-6000 Series USER GUIDE Basic Edition
Precautions & Introduction
CAUTION