Falcon Graphics RJ-6000 Series - Manual (Page 47)

Step 3
While pressing the roll, pull the fixed flange end of the scroller
sharply several times then remove the movable flange and take
off the roll.
• Don't put the hold lever up while the head is moving (during
printing, media detection, media cutting, cleaning, etc.) other-
wise the head will touch the media keeper blade and cause
damage and bad printing.
• When putting the hold lever up to load media, etc., make sure
the head is in the stand-by position (maintenance position).
The lever can not be put up if the head is not in the stand-by
position.
• Don't move the head while the hold lever is up. The head may
contact the media keeper blade.
46 RJ-6000 Series USER GUIDE Basic Edition
Loading the Media
Loading Roll Media
NOTE Removing roll media
Fixed Flange Pull off the movable flange
NOTE