Falcon Graphics RJ-6000 Series - Manual (Page 81)

A washing set that is separately sold is required in order to change the type of
inks used in the RJ-6000.
Ink switching involves switching light cyan and light magenta for orange and
green pigment inks or interchanging pigment inks and dye inks.
Step 1
Remove the currently loaded ink cartridges from the back and insert the wash-
ing set.
Step 2
Carry out washing by referring to the "Utility Settings: Head Wash" item on
page 72 of the Functions Edition of the User Guide.
Step 3
After washing has finished, insert the
required type of ink cartridges.
• Switching is not possible unless all six inks are of the same
type
• Only genuine ink cartridges can be used. They also need to be
turned in the proper direction for insertion. Make sure not to
confuse the direction and place for insertion.
• Open the ink cartridge just before you load it into the slot.
Printing may be blurred if the ink cartridge is left open for a
long time.
• Ink cartridges should be used within two years of the date that
is printed on the package. Cartridges that have been loaded
into the printer should be replaced within six months.
Step 4
Ink filling operations begin.
Switching Inks
80 RJ-6000 Series USER GUIDE Basic Edition
NOTE
I n k R e f i l l 1 M