Falcon Graphics RJ-6000 Series - Manual (Page 68)

If roll media is being used, the media will be fed in the normal direction while
the [Shift] key and [Media Feed] key are pressed. Roll media will not be fed
while data is being received or processed. Media is not fed while cut media is
in use.
Step 1
The media feed function can be used only when roll media is loaded and data
is not being received.
Step 2
Feed roll media by pressing the [Media Feed] key (MENU, Menu Down key)
while you are pressing the [Shift] key.
Step 3
Release the [Shift] key and [Media Feed] key (MENU, Menu Down key) when
the roll media has been fed to the desired position.
• If the printing surface of the roll media that is to be used for
printing is dirty, press the [Media Feed] key (MENU, Menu Down
key) while pressing the [Shift] key to feed the media until the
printing surface is clean. Then use the [CANCEL] key to cut off
the dirty media.
Media Feed
67 RJ-6000 Series USER GUIDE Basic Edition
Direct Access
Keys
NOTE