Falcon Graphics RJ-6000 Series - Manual (Page 98)

Possible Cause Remedy
Reference
Page
Page 41
#Can't install printer driver
Possible Cause Remedy
Reference
Page
Page 51
Page 51
#Can't go online with Centronics
Possible Cause Remedy
Reference
Page
Page 48
Page 56 of
Functions
Page 33 of
Functions
97 RJ-6000 Series USER GUIDE Basic Edition
When Trouble Strikes
When T
rouble Strikes
(4) Is the scroller mounted
correctly?
Mount the scroller correctly
(1) Did you add the printer?
(2) After you specified the
CD-ROM drive, did you
select the "\English\95\
RJ-6000" folder?
Install it again.
Install again after correctly
specifying the drive containing
the "MUTOH PRINTER SOFT-
WARE" CD-ROM and the fold-
er.
(1) Is the Centronics interface
cable connected properly?
(2) Does the DATA LED on the
control panel light up
when the application
sends the printing data?
(3) Does the printer's
Centronics setting mode
and timing agree with the
environment on the com-
puter side?
(4) Does the command type
that is currently set-up
match on the application
and on the driver side?
Connect the Centronics inter-
face cable properly.
If the DATA LED does not light
up, contact the application
supplier or the computer sup-
plier.
Align the printer's Centronics
settings with the timing on the
computer side.
Set up user set-up commands.