Falcon Graphics RJ-6000 Series - Manual (Page 51)

• If values other than those set at the time of shipping from
Mutoh are used, be sure to refer to "Centronics Settings" or
"Network Settings" in the separate Functions Edition of the
User Guide.
Command Set-up (User Settings)
Each user will specify the online commands from the computer and the com-
mand conditions.
Commands
The type of command for verification is the MH-GL system (MH-GL/GL2, MH-
GL2, RTL-PASS).
MH-GL system commands (emulation of Hewlett-Packard printer com-
mands)
Settings at the time of shipping by Mutoh
Command Item
Initial position P1
Terminator Normal
Resolution 360 dpi
• If values other than those set at the time of shipping from
Mutoh are used, be sure to refer to "Command Settings" in the
separate Functions Edition of the User Guide.
50 RJ-6000 Series USER GUIDE Basic Edition
To Receive Data from the Computer
Command Set-up (User Settings)
NOTE
NOTE