FORD SUPER DUTY F-SERIES 6C34-19A268-BA - Manual (Page 15)

13
F-SERIES
(March, 2005)
106 The statement below is applicable to the Chassis
Cab:
This vehicle, when completed, will conform to Standard
106, Brake Hoses, if the brake hose assemblies supplied
by Ford Motor Company are not removed, relocated,
altered, or modified and if no brake hose assemblies
are added.
108 The statements below, concerning Standard 108
Lamps, Reflective Devices, and Associated Equipment
are applicable to the Chassis Cab:
No additional components may be added to the
vehicle which require the use of tools to remove such
components, for access to the headlamp aiming devices
as provided by Ford Motor Company.
Daytime Running Lamps (DRL’s); Light Trucks for sale
or use in Canada are equipped with DRL’s that meet
the Canadian DRL requirements. As manufactured for
Canada, the F-Series vehicles will meet the FMVSS 108
requirements for DRL’s when DRL’s are provided.
Conformity with Standard 108, S.12, Headlamp
Concealment Devices, are not substantially affected
by the design of this incomplete vehicle; accordingly,
Ford Motor Company makes no representation as to
conformity with this Standard.
108 The statement below is applicable to the Chassis
Cab with a GVWR of 4536 kg [10,000 lb] or less and a
vehicle width less than 2032 mm [80.00 in]:
This vehicle, when completed, will conform to Standard
108, Lamps, Reflective Devices, and Associated
Equipment. If the Chassis Cab Center High Mounted
Stop Lamp (CHMSL), when provided, is obstructed from
the rear of the completed vehicle it must be replaced
with a CHMSL that meets all the requirements of this
standard and is connected to the electrical power source
as provided by Ford Motor Company. See the figure
below for circuit location.
CENTER HIGH MOUNTED STOP LAMP (CHMSL)
ELECTRICAL CONNECTOR LOCATION
FRONT OF
VEHICLE
SUPER DUTY F-SERIES CHASSIS CAB
CHMSL
FIXED
CIRCUIT
STATEMENTS OF CONFORMITY