FORD SUPER DUTY F-SERIES 6C34-19A268-BA - Manual (Page 17)

15
F-SERIES
(March, 2005)
110 U.S. Requirements:
The statement below is applicable to all incomplete
vehicles with a GVWR of 4536 kg [10,000 lbs] or less
with a completion date starting 09/01/2005:
This incomplete vehicle does not comply to FMVSS
110. In order to comply, the final stage manufacturer
must permanently affix a tire placard as specified in
paragraph S4.3 of FMVSS 110, typically to the driver’s
side B-pillar. See below for placard content and note
color and format requirements in S4.3.
115 Canadian Requirements:
The statements for Part 565.4 are appropriate compliance
representations for CMVSS 115, Vehicle Identification
Number, if this incomplete vehicle was manufactured for
sale or use in Canada.
116 The statement below is applicable to the Chassis
Cab:
This vehicle, when completed, will conform to Standard
116, Motor Vehicle Brake Fluids, so long as any
brake fluid added or replaced conforms to the DOT 3
specifications of the standard and contaminants are not
introduced into the hydraulic brake system.
118 The statement below is applicable to the Chassis Cab
not equipped with power operated windows, partition
or roof panel systems and their actuation devices
when completed as either a MPV or a Truck with a
GVWR of 4536 kg [10,000 lb] or less:
Conformity with Standard 118, Power Operated
Window, Partition, and Roof Panel Systems, is not
substantially affected by the design of this incomplete
vehicle; accordingly, Ford Motor Company makes no
representation as to conformity with this Standard. If any
power operated window, partition, or roof panel systems
are installed by subsequent stage manufacturers, they
must conform to the requirements of Standard 118.
118 The statement below is applicable to the Chassis Cab
equipped with power operated windows, partition or
roof panel systems and their actuation devices when
completed as either a MPV or a Truck with a GVWR of
4536 kg [10,000 lb] or less:
This vehicle, when completed, will conform to Standard
118, Power Operated Window, Partition, and Roof Panel
Systems, if the power operated windows, motors, wiring,
and key and switch activation systems, where provided
by Ford Motor Company, are not removed, relocated,
altered, or modified in any way. If additional power
operated window, partition, or roof panel systems are
installed by subsequent stage manufacturers, they must
conform to the requirements of Standard 118.
119 The statement below is applicable to the Chassis
Cab:
All tires supplied by Ford Motor Company are in full
conformity with Standard 119, New Pneumatic Tires for
Vehicles Other than Passenger Cars.
If additional tires are installed or the existing tires are
replaced by subsequent stage manufacturers, they must
conform to the requirements of Standard 119.
120 The statement below is applicable to the Chassis
Cab:
This vehicle, when completed, will conform to the tire
and rim selection requirements of Standard 120, Tire
Selection and Rims for Motor Vehicles Other Than
Passenger Cars, if the tire and rim assemblies and the
Incomplete Vehicle Information label that is affixed to the
vehicle are not removed, altered, or replaced.
STATEMENTS OF CONFORMITY
T125/70D15
TIRE AND LOAD INFORMATION
SEE OWNERS MANUAL FOR ADDITIONAL INFORMATION
The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs.
COMPACT TIRE SIZE COLD TIRE INFLATION PRESSURE
420KPA, 60PSI
SEATING CAPACITY FRONT: 2 REAR: 3 TOTAL : 5
FRONT
REAR
ORIGINAL TIRE SIZE COLD TIRE INFLATION PRESSURE
FRONT
REAR
P195 / 70R14
P195 / 70R14 200KPA, 29PSI
200KPA, 29PSI
111 The statement below is applicable to the Chassis Cab
when not equipped with outside mirrors:
Conformity with Standard 111, Rearview Mirrors, is not
substantially affected by the design of this incomplete
vehicle; accordingly, Ford Motor Company makes no
representation as to conformity with this Standard.
111 The statements below are applicable to the Chassis
Cab when equipped with a flat glass mirror on the
passenger-side:
This vehicle, when completed, will conform to Standard
111, Rearview Mirrors, if:
• The mirrors and their mounts as supplied by Ford
Motor Company are not removed, relocated, replaced,
or altered.
• No structural modifications are made to the body which
would affect the stability of the mirror mounts.
• Any modifications or additions made to the incomplete
vehicle must not adversely affect the driver’s view to
the rear in the outside mirrors along both sides of the
vehicle.
113 The statement below is applicable to the Chassis
Cab:
This vehicle, when completed, will conform to Standard
113, Hood Latch Systems, if the hood latch system as
provided by Ford Motor Company is not removed or
altered.
114 The statements below are applicable to the Chassis
Cab when completed as either a MPV or a Truck with
a GVWR of 4536 kg [10,000 lb] or less:
This vehicle, when completed, will conform to Standard
114, Theft Protection, if the following components, to
the extent provided by Ford Motor Company, are not
removed, relocated, altered, or modified in any way:
• Steering column locking mechanism system
• Ignition key/transmission shift interlock locking
system
• Ignition key-locking system
• Key warning buzzer system
If any of the above components are added to the
vehicle they must conform to the requirements of this
Standard.