Table 2 communications commands continued 49, Table 2, Communications commands continued – Fluke 9107 User Manual
Page 54
9105/9107
49
9 Digital Communication Interface
Command Description
Command
Format
Command
Example
Returned
Returned
Example
Acceptable
Values
These commands are only used for factory testing.
Read software cutout mode
*sco
*sco
sco: {ON or OFF}
sco: ON
Set software cutout mode:
*sco=ON/OF[F]
ON or OFF
Set software cutout mode on
*sco=ON
*sco=on
Set software cutout mode off
*sco=OF[F]
*sco=off
Miscellaneous (not on menus)
Read firmware version number
*ver[sion]
*ver
ver.9999,9.99
ver.9105,3.54
Read structure of all commands
h[elp]
h
list of commands
Legend:
[] Optional Command data
/ Alternate characters or data
{} Returns either information
n Numeric data supplied by user—may be entered in decimal or exponential notation
9 Numeric data returned to user
x Character data returned to user
Note:
When DUPLEX is set to FULL and a command is sent to READ, the command is returned followed by a carriage return and linefeed. Then the
value is returned as indicated in the RETURNED column.
Communications Commands Continued