6 ramp and soak program menu 31, 1 number of program set-points 31, Figure 7 switch test data 31 – Fluke 9107 User Manual
Page 36: Ramp and soak program menu, 1 number of program set-points, Figure 7, Switch test data, 6 ramp and soak program menu
8.6
Ramp and Soak Program Menu
The ramp and soak program feature allows the user to program a number of
set-points and have the dry-well automatically cycle between the temperatures,
holding at each for a determined length of time. The user can select one of four
different cycle functions.
The program parameter menu is accessed by pressing “SET” and then “UP”.
20.00 C
Well temperature
S+U
Access program menu
ProG
Program menu
Press “SET” to enter the program menu
S
Enter program menu
8.6.1
Number of Program Set-points
The first parameter in the program menu is the number of set-points to cycle
through. Up to 8 set-points can be used in a ramp and soak program.
Pn=8
Number of program set-points
9105/9107
31
8 Controller Operation
40
45
50
55
60
65
70
75
80
85
90
Time
Deg C
Figure 7 Switch Test Data