GE MULTILINK ML2400 - Manual (Page 241)

CHAPTER 14: QUALITY OF SERVICE QUALITY OF SERVICE
MULTILINK ML2400 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL 14–7
Configuring QoS (continued)
ML2400(qos)## show qos
==============================
PORT | QOS | STATUS
==============================
9 | None | UP
10 | Port | DOWN
11 | Tag | DOWN
12 | None | DOWN
13 | None | UP
14 | None | DOWN
15 | None | DOWN
16 | None | DOWN
ML2400(qos)## show qos type=tag
==============================
PORT | QOS | STATUS
==============================
9 | | UP
10 | | DOWN
11 | 6 | DOWN
12 | | DOWN
13 | | UP
14 | | DOWN
15 | | DOWN
16 | | DOWN
ML2400(qos)## setqos port=12 priority=high type=tag tag=5
Successfully set QOS.
ML2400(qos)## show qos type=tag
==============================
PORT | QOS | STATUS
==============================
9 | | UP
10 | | DOWN
11 | 6 | DOWN
12 | 5 | DOWN
13 | | UP
14 | | DOWN
15 | | DOWN
16 | | DOWN
ML2400(qos)## show-portweight
Port priority Weight set to 1 High : 1 Low.
ML2400(qos)## set-weight weight=4
ML2400(qos)## show-portweight
Port priority Weight set to 8 High : 1 Low.
(continued on next page)
The queue behavior is set so that 8
high-priority packets and 1 low-priority
packet is sent out.