GE MULTILINK ML2400 - Manual (Page 27)

CHAPTER 1: INTRODUCTION INTRODUCTION
MULTILINK ML2400 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL 1–17
ping
set
show
telnet
terminal
walkmib
whoami
ML2400>
The following example lists commands starting with a specific string:
ML2400> s <TAB>
set
show
ML2400>
In the following example, the <TAB> key completes the command:
ML2400> se<TAB>
password
timeout
vlan
ML2400> set
1.5.10 Exiting
To exit from the CLI interface and terminate the console session use the logout
command. This command prompts to ensure that the logout was not mistakenly typed.
The following syntax applies:
logout
The following example illustrates logging out from a session:
ML2400> logout
Logging out from the current session [’Y’ or ’N’] Y
Connection to the host lost