GE MULTILINK ML2400 - Manual (Page 270)

16–12 MULTILINK ML2400 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
SNMP CHAPTER 16: SNMP
Z When adding SNMP trap receivers, click on the Add button on the
SNMP menu screen.
Z Make sure that each station can be pinged from the switch by using
the Administration > Ping menu.
Z Determine which sorts of traps each station will receive, as shown
above. If not sure, select all three types.
Z When done adding trap receivers, click OK.
Note the different types of trap receivers added.
Stations can be deleted using the delete icon ( ). To change the stations characteristics
or IP addresses, it is recommended to delete the station and add a new one.
Z After all changes are made, save the changes using the save icon
(
).