GE MULTILINK ML2400 - Manual (Page 277)

CHAPTER 17: MISCELLANEOUS COMMANDS MISCELLANEOUS COMMANDS
MULTILINK ML2400 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL 17–5
17.1.3 Configuring Alarm Relays with EnerVista Secure Web Management Software
To customize the alarm relays,
Z Select the Configuration > Alarms menu item.
Alarm relays (continued)
ML2400(alarm)## show alarm
Alarm Events Configuration
--------------------------
Alarm Status: DISABLED
Relay Closure Time Period: 5 Seconds
EventId Description Mode
------------------------------------------
1 S-RING OPEN NOT ENABLED
2 Cold Start MOMENTARY
3 Warm Start NOT ENABLED
4 Link Up MOMENTARY
5 Link Down NOT ENABLED
6 Authentication Failure MOMENTARY
7 RMON Raising Alarm NOT ENABLED
8 RMON Falling Alarm MOMENTARY
9 Intruder Alarm MOMENTARY
10 Link Loss Learn Triggered MOMENTARY
11 Broadcast Storm Detected MOMENTARY
12 STP/RSTP Reconfigured MOMENTARY
ML2400(alarm)## exit
ML2400#