Motorola APS120 - Manual (Page 26)

3 • 10
3.2.4 A s s ig n i n g P o r t E xt e n s io n s
For the APS Custom to operate correctly, you must specify the extensions of the two PBX
service ports connected to the unit. If the extension for Service Port 1 is missing or
entered inaccurately, the recording feature will not operate correctly.
To specify the extension numbers, select the
Port Data button from the PCI Main Dialog
Box (Figure 3-1). Enter the extensions for
Service Ports 1 and 2 on the Port Information
s c reen (Figure 3-5). For more detailed
information on service ports, refer to section
2.4, Connecting the Unit.
Select OK to re t u rn to the PCI Main Dialog Box,
or Next to proceed to the Event Scripts scre e n .
F i g u re 3-5: P o rt Information Scre e n
The Event Script Editor (Figure 3-6) enables you to create and edit event scripts comprised
of overhead announcements, user names and local pages. You can configure up to 30
scripts. Each script may be assigned to any of the e i g h t contact closure s .
To create or modify a script, select the Event Scripts button from the PCI Main Dialog Box
( F i g u re 3-1). Select a script number by clicking on the arrow key of the Script Number
field.
Move the cursor to the
Script Name field, type
a script name of up to
20 characters, and pro-
ceed with the script
i n s t ructions specified in
section 3.2.5.1, A d d i n g
an Overhead Page to a
Contact Closure Event
S c r i p t section below.
F i g u re 3-6: Event Script Editor Scre e n
3.2.5 C o n f i gu ri n g C o n t ac t C l os ur e Ev e n t Sc r i p ts