Motorola APS120 - Manual (Page 53)

5 • 1 0
To send the called party a canned text message, follow the steps below.
5. Follow steps 1 through 4 above, Sending a Local Wireless Page.
6. Press the
* (star) key.
7. Enter a message number [1 through 30] and press the # (pound) key. If the
m e s s a g e number specified is not valid, the system responds with “INVALID”
and prompts you to re-enter a message number. The system confirms that
the page was sent.
5 . 5 . 1 . 2
S e n d i n g a n O v e r h e a d P ag e
If the party has overhead paging, then the following prompts/actions occur.
1. Follow steps 1 and 2 above, Paging an Individual.
2. The system prompts the caller to press 1 if it is an outside call or to press
2 if it is an internal call. Internal callers are those individuals calling from
within the PBX. Outside callers are those calling from outside of the PBX.
• An outside caller is asked to hold while the individual is paged.
• An internal caller will be prompted to enter the extension at which
he/she can be reached. The system may or may not confirm the
extension specified, depending on whether or not the confirmation
option was selected on the PCI database. The system confirms that the
page was sent.
NOTE: If the PBX Supports Park Feature option on the PCI screen is
not enabled, then the system automatically treats the caller as
internal and only prompts for the extension only (see section
3.2.3, Setting PBX Parameters).
If the called party has wide area paging, then the following prompts/actions occur.
1. Follow steps 1 and 2 above, Paging an Individual.
2. The system prompts the caller to enter his or her telephone number followed
by the # (pound) key.
3. Depending on how the database is configured, the system may or may not
request confirmation of the telephone number. The system confirms that the
page has been sent.
5 . 5 . 1 . 3
S e n d i n g a Wi de A r e a P a g e