Motorola and V.32bis - Manual (Page 124)

A-2 Configuration Quick Reference
Configur
ation
Q
uick-Ref
e
re
nce
Configuration Quick-Reference—Menu Trees
This appendix contains information useful for configuring and operating the modem:
• Configuration options and functions:
— Table A-1 lists AT commands. Commands are cross-referenced to front
panel options. Parameters whose options are restricted due to country
requirements are shaded gray.
— Table A-2 lists configuration options that do not have AT equivalents.
These options are organized by the main menu in which they appear.
• The menu structure (Figures A-1 to A-4): front panel options, option settings,
and AT, AT&, AT * command equivalents, and default settings. (The Reference
Card shows the menu tree as well.)
• Numeric entry information: how to use the front panel control keys to change
numeric values of configuration settings.
• S-Registers, cross-referenced to AT Commands and front panel options.
• Dial modifiers
• Result codes: numeric (short form) and word (long form)
• Instructions for configuring Dual In-line Package (DIP) switches, which let
you override configuration settings normally selected through AT commands or
the front panel.
For More Detail
For more information on configuration, order the 326X Series Modem Reference
Guide by contacting your Motorola sales representative or local distributor.
Audience and Assumptions
This chapter assumes you understand AT command syntax and use. (To review, refer
to Chapter 5, Using the AT Automatic Calling Interface.)
This chapter assumes you understand how to use the front panel to navigate the
configuration menus, and how to alter configuration options. (To review, refer to
Chapter 3, Getting Started.)