Motorola and V.32bis - Manual (Page 68)

4-6 Configuring the Modem
C
onfiguring
th
e M
odem
Configuration Option Sets
This section discusses the modem’s preconfigured option sets, in three parts:
• What is an Option Set?
• How to Configure an Option Set
• Option Set Defaults—326X V.32bis, 326XFAST V.34, and 326XFAST-SDC
What is an Option Set?
Option sets are complete configurations, each tailored for an application and stored
in memory. Option sets get the modem working quickly.
If an option set does not exactly suit your needs, pick the one that most closely
matches your application, modify its settings, and save the changes in the modem’s
nonvolatile memory (refer to Appendix A).
Table 4-1 shows V.3bis and V.34 option sets. Table 4-2 shows SDC option sets.
Table 4-1.
Option Set Summary—326X V.32bis and V.34 Modems
Application
Option
Set
Async dial applications in which you are using the AT ACU to originate calls to
a central site (default option set) 1
Sync central site auto-answer applications; no ACU 2
Sync calls to a central site 3
Async central site auto-answer applications; no ACU (Models 3260/62/65/67) 4
Leased line application with dial restoral; no ACU (Models 3261/63/66/68) 4
Table 4-2.
Option Set Summary—326X
FAST -SDC Modem
Application
Option
Set
Async dial applications in which you are using the AT ACU to originate calls to
a central site (default option set) 1
Sync dial A/B restoral application 2
Sync dial only application 3
Sync leased line application with dial restoral; no ACU (Models 3261/63/66/68) 4