MicroNet Technology SP1659P - Manual (Page 102)

enable tos
Syntax: enable tos
Description: To enable ToS.
Argument:
None
Possible value:
None
Example:
SP1659P(qos)# enable tos
set dscp
Syntax: set dscp [<q0><priority>] [<q1><priority>] [<q2><priority>] [<q3><priority>]
Description: To set IP DSCP qos weighting for 4 queues.
Argument:
<q>: queue level, q0: queue 0; q1: queue 1; q2: queue 2; q3: queue 3.
<priority>: priority level. One queue has been assigned 2 different priorities. You don't need to use all of
queue, but must assign queue in order. Syntax: 1, 2 or 2, 5-7, available from 0 to 63.
Possible value: <priority>: 0 to 63
Example:
SP1659P(qos)# set dscp q0 2 q1 2 q2 2 q3 3
set pri-tag
Syntax: set pri-tag [<q0><priority>] [<q1><priority>] [<q2><priority>] [<q3><priority>]
Description: To set 802.1p qos weighting for 4 queues.
Argument:
<q>: queue level, q0: queue 0, q1: queue 1, q2: queue 2, q3: queue 3.
<priority>: priority level. One queue has been assigned 2 different priorities. You don't need to use all of
queues, but must assign queues in order. Syntax: 1, 2 or 2, 5-7, available from 0 to 7.
Possible value:
<priority>: 0 to 7.
Example:
SP1659P(qos)# set pri-tag q0 0 q1 2 q3 4
set sche
Syntax: set sche <wrr|strict> <wrr_0> <wrr_1> <wrr_2> <wrr_3>
Description: To qos schedule and weight for 4 queues.
Argument:
<wrr>: scheduling weighted round robin method
<strict>: scheduling strict method.
<wrr_0 to 3>: weighted for every queue. Weighted range: 1-55.
Possible value:
<wrr|strict>: wrr or strict
<wrr_0 to 3>: 1-55.
Example:
SP1659P(qos)# set sche wrr 1 2 8 16
set tos
Syntax: set tos <type_value> [<q0><priority>] [<q1><priority>] [<q2><priority>] [<q3><priority>]
Description: To set IP tos qos weighting for 4 queues.
101