MicroNet Technology SP1659P - Manual (Page 19)

Display the fiber optical transmitting central wavelength, for instance, 850nm, 1310nm, 1550nm and so
on.
Baud Rate:
Display the maximum baud rate of the fiber module supported, for instance, 10M, 100M, 1G, 10G and
so on.
Vendor OUI:
Display the Manufacturer's OUI code which is assigned by IEEE.
Vendor Name:
Display the company name of the module manufacturer.
Vendor P/N:
Display the product name of the naming by module manufacturer.
Vendor Rev (Revision):
Display the module revision.
Vendor SN (Serial Number):
Show the serial number assigned by the manufacturer.
Date Code:
Show the date this module was made.
Temperature:
Show the current temperature of module.
Vcc:
Show the working DC voltage of module.
Mon1(Bias) mA:
Show the Bias current of module.
Mon2(TX PWR):
Show the transmit power of module.
Mon3(RX PWR):
Show the receiver power of module.
3.4.2 Configuration
Port Configuration is applied to change the setting of each port. In this configuration function, you can set/reset
the following functions. All of them are described in detail below.
18