MicroNet Technology SP1659P - Manual (Page 96)

Description: To edit management policy record.
Argument:
[<name> <value>] ACL entry name.
[<vid> <value>] VLAN ID.
[<ip> <value>] IP Range.
[<port> <value>] Incoming port.
[<type> <value>] Access type.
<action> <value> a(ccept) or d(eny).
Possible value:
[<name> <value>] No default and it must be set.
[<vid> <value>] The range is 1-4095 and can be set to any.
[<ip> <value>] For example, 192.168.1.90-192.168.1.90 or any
[<port> <value>] For example, 1 or 1-8 or 1,3-5 or any
[<type> <value>] For example, h(ttp),s(nmp),t(elnet) or any
<action> <value> No default and it must be set.
Example:
SP1659P(management)# edit 1
SP1659P(management-edit-1)# set name Tom vid 2 ip 192.168.1.30-192.168.1.80 port 1-2 type s action d
SP1659P(management-edit-1)# show
#: 1
Name : Tom VlanID : 2 IP : 192.168.1.30-192.168.1.80
Type : SNMP Action : Deny Port : 1,2
show
Syntax: show
Description: To show the specific management policy record.
Argument: none
Possible value: none
Example:
SP1659P(management)# show
#: 1
Name : Tom VlanID : 2 IP : 192.168.1.30-192.168.1.80
Type : SNMP Action : Deny Port : 1,2
4.3.17 poe
set priority
Syntax: set priority <port-range> <priority>
Description: To set the PoE priority on ports.
Argument:
<port-range>：which port(s) you want to set, syntax 1,5-7, available from 1 to 24
<priority>: set priority as 0:Low, 1:Normal, 2:High
Possible value:
<port range>: 1 to 24
<priority>: 0, 1 or 2
Example:
SP1659P(poe)# set priority 1-12 2
95