MicroNet Technology SP1659P - Manual (Page 70)

Possible value: None.
Example:
SP1659P# save start
Saving start...
Save Successfully
4.2.8 save user
Syntax: save user
Description:
Save the current configuration as the user-defined configuration. When you enter this command, the CLI
would save your current configuration into the non-volatile FLASH as user-defined configuration.
Argument: None.
Possible value: None.
Example:
SP1659P# save user
Saving user...
Save Successfully
4.3 Local Command
4.3.1 802.1x
set max-request
Syntax: set max-request <port-range> <times>
Description:
That is the maximum number of times that the state machine will retransmit an EAP Request packet to the
Supplicant before it times out the authentication session.
Argument:
<port range> : syntax 1,5-7, available from 1 to 24
<times>: max-times , range 1-10
Possible value:
<port range> : 1 to 24
<times>: 1-10, default is 2
Example:
SP1659P(802.1x)# set max-request 2 2
set mode
Syntax: set mode <port-range> <mode>
Description: To set up the 802.1X authentication mode of each port.
Argument:
<port range> : syntax 1,5-7, available from 1 to 24
<mode>: set up 802.1x mode
0:disable the 802.1x function
1:set 802.1x to Multi-host mode
Possible value:
<port range> : 1 to 24
69