MicroNet Technology SP1659P - Manual (Page 111)

22 DISCARDING 2000000 128 No Auto
23 DISCARDING 2000000 128 No Auto
24 DISCARDING 2000000 128 No Auto
show status
Syntax: show status
Description: To display the status of STP.
Argument: None
Possible value: None
Example:
SP1659P(stp)# show status
STP Status :
STP State : Enabled
Bridge ID : 00:11:3B:D8:09:1D
Bridge Priority : 61440
Designated Root : 00:11:3B:D8:09:1D
Designated Priority : 61440
Root Port : 0
Root Path Cost : 0
Current Max. Age(sec) : 20
Current Forward Delay(sec) : 15
Hello Time(sec) : 2
STP Topology Change Count
: 0
Time Since Last Topology Change(sec) : 848
4.3.24 system
set contact
Syntax: set contact <contact string>
Description: To set the contact description of the switch.
Argument: <contact>:string length up to 40 characters.
Possible value: <contact>: A, b, c, d, ... ,z and 1, 2, 3, …. etc.
Example:
SP1659P(system)# set contact Taipei
set device-name
Syntax: set device-name <device-name string>
Description: To set the device name description of the switch.
Argument: <device-name>: string length up to 40 characters.
Possible value: <device-name>: A, b, c, d, ... ,z and 1, 2, 3, …. etc.
Example:
SP1659P(system)# set device-name CR-2600
set location
Syntax: set location <location string>
Description: To set the location description of the switch.
Argument: <location>: string length up to 40 characters.
Possible value: <location>: A, b, c, d, ... ,z and 1, 2, 3, …. etc.
Example:
SP1659P(system)# set location Taipei
110