Stereo audio system, A/v receiver, Figure 8) – MITSUBISHI ELECTRIC WD-62327 User Manual

Page 15

Advertising

��

� � � � �

�

��

� ��

��

� � � ��

��

�

��

�

��

�

��

�

� � � � �

�

��

� ��

��

� � � ��

��

Connecting a Stereo Audio System
Conecting an Audio Receiver

Stereo Audio System

(Recommended for shelf units or A/V receivers without
digital audio inputs)
(Figure 7)

1. Connect the audio cables from AUDIO MONITOR

OUTPUT on the TV back panel to TV IN or AUX IN

terminals on the back of the audio system.

• The red cable connects to the R (right) channel
• The white cable connects to the L (left) channel

2. Use the AUDIO/VIDEO SETTINGS menu (page 50)

to turn off the TV’s speakers.

3. Set the input of the audio system to the TV or AUX

position to hear the TV audio through your stereo
system.

Figure 7. Connecting the Stereo Audio System.

Figure 8. Connecting the A/V Receiver.

Note: Please see your A/V receiver Owner’s

Guide for more detailed connections.

These types of audio connections do

NOT support multi-channel digital audio.
Please refer to your other devices
Owner’s Guide to verify.

A/V Receiver

(Figure 8)

1. Connect either a video cable or an S-Video cable

(but not both) from VIDEO MONITOR OUT on the

back of the A/V receiver to VIDEO INPUT-1 or
INPUT-2 on the TV back panel.

Note: If the A/V receiver outputs an onscreen

menu, this connection allows you to view the

receiver’s menu on the television.

2. Connect a video cable from VIDEO MONITOR

OUTPUT on the TV back panel to VIDEO TV IN on

the back of the A/V receiver.

3. Connect a set of audio cables from AUDIO

MONITOR OUTPUT on the TV back panel to

AUDIO TV IN on the back of the A/V receiver.

• The red cable connects to the R (right) channel
• The white cable connects to the L (left) channel

Advertising

Popular Brands

Popular manuals