MITSUBISHI ELECTRIC WD-62327 - Manual (Page 59)

58 59
Component Inputs
These inputs are compatible with most standard
DVD and DTV signals with component video outputs.
Compatible DTV signals are SDTV 480i, 480p, and
HDTV 1080i.
All other DTV signals, such as 720p, need to be
converted by the DTV receiver (or compatible device)
to one of the compatible signal types. Please check
the specifications on your device before connecting.
Input Levels with Component Video
• Y = 1.0Vp-p (includes sync) 75ohms
• Pb = 700mVp-p, 75ohms (can also receive
signals from outputs labeled B-Y and Cb)
• Pr = 700mVp-p, 75ohms (can also receive
signals from outputs labeled R-Y and Cr)
Input Levels When Used With
Component Video Signals
EIA - 770.3 Standard Levels
• Y = 1.0Vp-p (includes sync) 75ohms
• Pb = 700mVp-p, 75ohms
• Pr = 700mVp-p, 75ohms
• H = Not Used
• V = Not Used
Input Levels when Used With RGB
Video Signals
• G (Y) = 1.0Vp-p 75ohms
(compatible with sync on green)
• B (Pb) = 700mVp-p, 75ohms
• R (Pr) = 700mVp-p, 75ohms
• H = 4Vp-p+/-1.0v, 2.2k ohms
(when using separate H and V sync)
• V = 4Vp-p+/-1.0v, 2.2k ohms
Input when Used With DVI
• HDCP compliant
• E-EDID (Enhanced-Extended Display Identification)
1.3 compliant
DVI-D uncompressed, high-speed, digital single-link
connection
• Compatible scan rates are 1080i, 480p, 480i
DTV Input
These inputs are compatible with most standard
DVD and DTV signals with component video outputs.
Compatible DTV signals are SDTV 480i, 480p, and
HDTV 1080i.
All other DTV signals, such as 720p, need to be
converted by the DTV receiver (or compatible device) to
one of the compatible signal types. Please check the
specifications on your device before connecting.
This input is also compatible with some DTV receivers
using RGB or RGB with “separate H and V sync.”
Industry standards for DTV RGB signals systems,
synchronization, timing, and signal strengths are
not currently established. These inputs will not be
compatible with all DTV receivers that offer RGB. If
your DTV receiver offers both DTV component video
signals and DTV RGB signals, Mitsubishi suggests you
use the DTV component video signals. Please check
the DTV receiver specifications before connecting.
Appendix B: High Definition Input Connection
Compatibility