MITSUBISHI ELECTRIC WD-62327 - Manual (Page 50)

50 51
AUDIO/VIDEO SETTINGS Menu: Overview
AUDIO/VIDEO SETTINGS Menu
(Figure 53)
Each input has its own A/V memory. You can adjust
each input’s A/V memory in two ways. You can use
the menu or the remote control.
A/V Memory Reset
A/V Memory Reset will return the currently selected
input’s A/V memory to the factory settings. To reset
an input’s A/V memory, select A/V Memory Reset,
select the input you want to reset, and press ENTER.
TV Speakers
This selection will turn on or off the TV’s internal
speakers. You may select Off when sending the sound
through a separate stereo system or surround sound
A/V receiver.
Audio Output
Select Fixed if your audio receiver or stereo system
can be controlled with a remote. This allows you to
adjust the volume with the system’s remote control or
the TV remote control, if compatible. This setting is
better for surround sound receivers. Select Variable
if your audio receiver or stereo system cannot be
controlled with a remote. This allows the TV’s internal
circuitry to adjust the volume.
Using the AUDIO and VIDEO Buttons
on the Remote Control
1. Press AUDIO or VIDEO to cycle through the
available settings.
2. Press or to adjust the setting. After 5 seconds
of inactivity, the setting display will disappear.
AUDIO/VIDEO SETTINGS menu
AV Memory Reset : Ant A
TV Speaker : On
(Internal)
Audio Output : Fixed
(AV Rec Vol Control)
AUDIO SETTINGS
VIDEO SETTINGS
or change option
ENTER for menu
MENU to return
ADJUST to select
MAIN MENU
Figure 53. AUDIO/VIDEO SETTINGS menu
AUDIO SETTINGS and VIDEO
SETTINGS
After selecting AUDIO SETTINGS or VIDEO SETTINGS,
you can adjust the settings by pressing , , , or
. For descriptions of the individual A/V settings, see
AUDIO/VIDEO Setting Descriptions, pages 51-52.