Audio/video setting descriptions: audio, Audio settings – MITSUBISHI ELECTRIC WD-62327 User Manual
Page 51
50
51
Audio Settings
• Bass
Enhances or reduces low frequency sound.
•
Treble
Enhances or reduces high frequency sound.
•
Balance
Adjusts the level of sound between the left and
right speakers.
•
Surround
Creates simulated stereo and surround effects.
Your choices are:
Off: No surround effects. Use this setting when
using an A/V receiver with Dolby™ Pro Logic
Surround, or Dolby™ Digital Surround.
Simulated Stereo: Your TV will create a
simulated stereo effect when watching a non-
stereo program.
Surround Sound: Your TV will create a
simulated surround effect when watching a
stereo program.
Listen to (for Ant-A and Ant-B): Determines how
your TV will receive a broadcast audio signal and
play back the sound you hear. Your choices are:
Stereo: Default setting. The TV will play stereo
broadcasts in stereo and mono broadcasts in
mono. The word “Stereo” will be displayed
when you tune to a channel broadcasting stereo.
SAP (Second Audio Program): Additional
monaural soundtrack that you cannot hear
during normal TV viewing. The SAP signal might
be related to the program you are watching,
such as a soundtrack in a foreign language, or
unrelated to the program you are watching
such as a weather report. If a SAP signal is
broadcast, the letters “SAP” will be displayed
when you tune to the channel.
Mono: Reduces background noise and should
be used when receiving a weak stereo audio
signal. All audio will be played mono with this
setting.
AUDIO/VIDEO Setting Descriptions: Audio
•
Listen to (for INPUTs) Is not available.
•
Level Sound
Automatically equalizes the volume level of
programs containing significant level differences
from one segment to another (for example, regular
programming to commercials). To receive the best
fidelity with music programs, you can turn this
setting to Off.
Note: A slider will display on-screen for each setting.
The slider has a numeric value, where 63 is the
maximum, the mid-range is 31 and the minimum
setting is 0.