MITSUBISHI ELECTRIC WD-62327 - Manual (Page 40)

40 41
CHANNEL EDIT Menu: Memory, Name Selection
Name
(Figure 26)
Name channels shown on Ant-A or Ant-B (up to four
characters). After you enter a name, it will appear on
the TV screen next to the channel number.
1. Select Ant-A or Ant-B.
2. Select the memorized channel you want to name.
3. Press ADJUST until you see the underline
highlighted in the Name field.
4. Use ADJUST or to select letters A-Z, numbers
0-9, and/or symbols (!.&’/:*- and blank) for each
character of the name you would like for the
selected channel. Press ENTER after choosing
each letter and after the name is complete. If you
want to change your selection while on the option
field, use CANCEL to delete the current character.
You will move one position back. If you press
CANCEL while at the first character, the entire
name will be deleted.
Memory
(Figure 25)
Add weaker channels viewed with Ant-A or Ant-B and
delete unwanted channels, after all available channels
have been memorized with Memorize Channels (page
33). Use the CHANNEL button on the remote control
to view memorized channels.
CHANNEL EDIT menu
ANTENNA : Ant A
Channel : 002
Memory : Added
Name : KCBS
SQV : SQV1
Off
or change option
ENTER to confirm
CANCEL to cancel
ADJUST to select
MAIN MENU
CHANNEL EDIT menu
ANTENNA : Ant A
Channel : 002
Memory : Added
Name :
SQV : SQV1
Off
or change option
ENTER to confirm
CANCEL to cancel
ADJUST to select
MAIN MENU
Figure 25. Memory
Figure 26. Name