MicroNet Technology IP TELEPHONY GATEWAY SP5052 - Manual (Page 11)

11
(a) Configure VoIP FXO gateway Password
It is important for the first time user to follow the operation procedure.
1. Power on the VoIP FXO gateway and the sentence “Please wait while
system is initializing…………S” is displayed.
Attached TCP/IP interface to cpm unit 0
Attaching interface lo0...done
Please wait while system is initializing .......... S
2. Wait around 40 seconds, the login name and password are requested.
Attached TCP/IP interface to cpm unit 0
Attaching interface lo0...done
AC4804[0] is OK
AC4804[1] is OK
AC4804[2] is OK
Successful
Initialize OSS libraries...OK!
open stack successful
cmInitialize succeed!
GK mode selected.
login:
3. Login: when VoIP FXO gateway is used for the first time, “root” is default
login name without a password.
4. Password setting: type “passwd –set root ****” to define a password for
“root” account. “****”, in above description, stands for contents of the
password. An example, to set root’s password as good, is demonstrated
as following:
usr/config$ passwd -set root good
Setting
login: root
Password: good
OK