MicroNet Technology IP TELEPHONY GATEWAY SP5052 - Manual (Page 41)

41
-dspcore update DSP kernel code(optional)
-dspapp update DSP application code(optional)
-rbpcm update RingBack Tone PCM file(optional)
-htpcm update Hold Tone PCM file(optional)
-greeting update Greetings PCM file(optional)
-askpin update AskPin file(optional)
-s IP address of TFTP/FTP server (mandatory)
-f file name(mandatory)
-method download via TFTP/FTP (TFTP: mode=0, FTP: mode=1)
-ftp specify username and password for FTP
Note:
This command can run select one option in 'app', 'dsptest', 'dspcore',
'dspapp', and 'rbpcm'.
Example:
rom -method 1
rom -ftp vwusr vwusr
rom -app -s 192.168.4.101 -f app.bin
Parameter Usages:
-print
show versions of all rom files
-app, boot, dsptest, dspcore, dspapp to update main Application program
code, Boot code, DSP testing code, DSP kernel code, or DSP
application code.
-boot2m boot2m parameter let users to upgrade the whole system flash,
including all the firmware that mentioned above. If 2M rom file
update is executed,
users have to set again the MAC address
of VoIP FXO gateway or it will cause conflict on Ethernet
because the original MAC address is erased during 2M
ROM file upgrading.
Note:
To set MAC address please key in command setmac:(when key in MAC
address ,press enter each time after key in two characters):
usr/config$ setmac
- enter mac address
00
01
a8
00
0x
xx
- the mac address is 00 01 a8 00 0x xx
- if mac address is correct, please press 'y' to
setup configuration, else press 'n' to continue
-greeting The greeting file can be updated by users. The attributes of
sound file should complied to: μ-law, 8000 Hz , 8 bit, Mono, 7
kb/s
-askpin update ASKPIN sound file. This is the greeting sound that when