MicroNet Technology IP TELEPHONY GATEWAY SP5052 User Manual

Page 33

Advertising
background image

33

Usage:
gk [-add type1 [[type2]...]] [-delete h323] [-ttl value
[-enable 0/1] [-security enable/disable]

-print Display

the

enabled

debug

flags.

-enable

Enable

simple

gatekeeper

-ttl

Set

TTL

value

-add

Add

dynamic

endpoint

(h323

ID,

E164,

IP,

port,

type)

-delete

Delete

dynamic

endpoint

-security enable Enable security check

-security disable Disable security check

-security add Add security record

-security delete Delete security record

Example:

gk -add h323 256 192.168.1.1 1720 0

gk -delete h323

gk -security delete h323

gk -security add h323


Parameters Usage:
-print

print current embedded gatekeeper information and
configurations.

-enable

to enable gatekeeper feature (0: disable, 1: enable).

-ttl

to set timer for TTL(Time To Live).In this period of time, if
endpoint doesn’t send RRQ to GK,GK will determine this
endpoint as not exist anymore and delete it from registered list.

-add

To add an endpoint that doesn’t send RRQ to GK. User can
predefine an endpoint in GK, and GK will treat this endpoint has
already registered to GK, though it doesn’t send register request
to GK. (gk –add “H.323 ID” “e164” “IP address” “signaling port”
“gateway type,0=terminal,1=gateway”, for example, gk –add test
123 10.1.1.1 1720 0)
Note: After you reboot the machine, the register information will
disappear.

-delete

To delete dynamic endpoint which user added formerly.
(gk –delete “H.323 ID”)

-security enable

To enable security check. If this function is enabled, GK
will only accept registration request from endpoints, which
are added with gk –security add command.

-security disable To disable security check.
-security add

To add endpoints to register to GK which enable security
check.(gk –security add “H.323 ID”)

-security delete

To delete endpoints that added formerly in security check
list.(gk –security delete “H.323 ID”)

5.16 [voice] command

The voice command is associated with the audio setting information. There
are four voice codecs (g.729a optional) supported by VoIP FXO gateway.

Advertising
This manual is related to the following products: