MicroNet Technology IP TELEPHONY GATEWAY SP5052 - Manual (Page 13)

13
Note: mode 1 is for Peer-To-Peer (non-gk) mode, while mode 0 is for GK
mode.
2. Configure Phonebook, using “pbook” command.
Users can refer to chapter 5.11 [pbook] command for more information.
usr/config$ pbook –add name TEST1 ip 10.1.1.1 e164 10
Note:
The command is to add a record onto Phonebook. After the command
completed, you can type “pbook –print” to see if the input record is correct.
When adding a record to Phonebook, users do not have to reboot the
machine, the record will be effective immediately.
3.3 Behind IP-Sharing
The function is for user whose network environment is behind IP Sharing
device. It is said VoIP FXO gateway is connected to the IP Sharing device. An
example such as ADSL network is in the following.
ATU-R ADSL Modem
WAN
IP Sharing device
LAN LAN
VoIP FXO gateway PC
z The WAN IP address obtained from ADSL has two kinds of methods. One
is fixed IP Address, while user applies for one or more fixed IP Addresses.
Another is dynamic IP Address while user applies for dial-up connection
way.
z The LAN IP address of user’s PC can be set as DHCP client in order to
gain an valid one.
z Anther IP address for VoIP FXO gateway must be set as an fixed one in
order for that IP sharing device pass forwarding the relevant information
from WAN to LAN. Besides, a valid IP address which meets the IP
sharing device (LAN site) is the element.
z VoIP FXO gateway must enable the IP sharing function for the fixed /
dynamic WAN IP Address.
Fixed IP Address –
usr/config$ ifaddr –ipsharing 1 210.11.22.33