Multiquip MQ Power Whisperwatt 60HZ Generator DCA150USJ2 - Manual (Page 31)

DCa150USJ2 60 hz generator • operation anD partS manUal — rev. #0 (08/22/11) — page 31
diagnOstic display
9. The parameter that is highlighted is the selected
parameter for the screen. Use the “Arrow Buttons” to
highlight the new parameter to be placed in the
quadrant selected in the previous screen.
10. Touch the “Enter Button” to change the selected
parameter in the quadrant to the new parameter.
11. Use the “Menu Button” to return to the “4-Up
Custom Setup” screen.
12. The parameter in the selected quadrant has changed
to the parameter selected in the previous screen.
13. Repeat the parameter selection process until all spaces
are filled.
ENGINE SPEED
ENGINE COOLANT TEMPERATURE
BATTERY POTENTIAL
ENGINE OIL PRESSURE
ENGINE HOURS
ENGINE OIL TEMPERATURE
3
1
4
2
The number to the right
of the parameter indicates
the quadrant in which it
is displayed.
1= Upper Left Quadrant
2 = Lower Left Quadrant
3 = Upper Right Quadrant
4 = Lower Right Quadrant
ENGINE SPEED
ENGINE COOLANT TEMPERATURE
BATTERY POTENTIAL
ENGINE OIL PRESSURE
ENGINE HOURS
ENGINE OIL TEMPERATURE
3
1
2
4
ENGINE SPEED
ENGINE COOLANT TEMPERATURE
BATTERY POTENTIAL
ENGINE OIL PRESSURE
ENGINE HOURS
ENGINE OIL TEMPERATURE
3
1
4
2
Note the number to
the right of the selected
parameter indicating that the
parameter is now assigned
to that display location
125°F
COOL TEMP
143°F
OIL TEMP
57 PSI
1000 RPM
ENG RPM
OIL PRES
14. Touch the “Menu Button” to return to the main menu.
15. Touch the “Menu Button” to exit the Main menu and
return to the engine parameter display.
Utilities (information and troubleshooting)
1. Starting at the single or four engine parameter display,
touch the “Menu Button”.
2. The main menu will be displayed. Use the “Arrow
Buttons” to scroll through the menu until the “Utilities”
is highlighted.
3. Once the “Utilities” menu item has been highlighted,
touch the “Enter Button” to activate the “Utilities”
functions.
125°F
COOL TEMP
143°F
OIL TEMP
57 PSI
1000 RPM
ENG RPM
OIL PRES
GO TO 1-UP DISPLAY
STORED CODES
ENGINE CONFG
ADJUST BACKLIGHT
SETUP 1-UP DISPLAY
SELECT UNITS
SETUP-4-UP DISPLAY
125°F
COOL TEMP
143°F
OIL TEMP
57 PSI
1000 RPM
ENG RPM
OIL PRES
COOL
1800 RPM
0 1500 3000
TEMP ENG RPM
125°F
COOL TEMP
143°F
OIL TEMP
57 PSI
1000 RPM
ENG RPM
OIL PRES
ENGINE CONF
SETUP-4-UP DISPLAY
SELECT UNITS
STORED CODES
G
SETUP 1-UP DISPLAY
ADJUST BACKLIGHT
UTILITIES
ENGINE CONF
SETUP-4-UP DISPLAY
SELECT UNITS
STORED CODES
G
SETUP 1-UP DISPLAY
ADJUST BACKLIGHT
UTILITIES