Marathon Computer UNIPRO V3.5 - Manual (Page 3)

Marathon Monitors Inc
.
Unipro 3.5 Process Control 1 Aug. 1997
Two (2) control output triacs for use in single or dual control
mode.
Two (2) fully isolated analog outputs, each separately configurable
for voltage or current output.
Two (2) configurable alarm triacs, assignable as process Alarms,
deviation alarms, program alarms, or fault alarms.
Four (4) programmer events, assignable in any combination as
either inputs or outputs (expandable to 16 I/O with external event
boards).
Three (3) communication ports for talking with host computers,
controllers, and discrete digital and / or analog event expansion
racks.
This manual provides all of the information required to install,
operate and maintain the MMI UNIPRO.
The manual is divided into parts: Installation, Setup and
Configuration, Operation, Programming, and Maintenance and
Troubleshooting. Installation and Setup and Configuration will be
used initially to get the instrument into use. Operation and
Programming will be used daily. Maintenance and
Troubleshooting will be used for servicing the instrument
periodically or if trouble occurs.