Marathon Computer UNIPRO V3.5 - Manual (Page 86)

Operation
UNIPRO 3.5
Rev. 11.00
December 30,1995
SETPOINT PARAMETERS
Display Parameters Description
Stpt Setpoint
The SET
display window line
represents the basic
parameter for the
Control Loop that
the process needs.
REF Reference
Number
Assign
s a number to
a program for
future
reference.
These
numbers can
range from 0
to 9999.
NM Operator Input
SET display
window line = -999
to 9999. Allows the
operator to enter
information that
may be needed by a
program. This input
may be used
similarly to the
reference number.