Marathon Computer UNIPRO V3.5 - Manual (Page 84)

Operation
UNIPRO 3.5
Rev. 11.00
December 30,1995
OPERATION
Once installation and setup
and configuration are complete,
the day to day operation needs of
the UNIPRO depend upon the
application. The basics are found
in the Quick Reference Guide.
TO RESPOND TO ALARM
MESSAGES:
Note the alarm and
determine what caused the alarm.
Press [ENTER] once to
deactivate (silence) alarm
relay contact and continue
program execution.
After acknowledging the alarm, one of the
following actions may be appropriate:
Abort the program by pressing the
[Prog/Auto/Man] key.
In the case of a timed-out LIMIT
statement (message #93), it is normally
desirable to continue the program by
re-executing the offending LIMIT
statement to be sure it is satisfied. This is
done automatically when the [ENTER]
key is pressed to acknowledge the alarm.
If you do not want to re-execute the
LIMIT statement, pressing the [SETPT]
key will cause the LIMIT statement to be
skipped and the program to continue to
the next STEP.