Marathon Computer UNIPRO V3.5 - Manual (Page 93)

MMI Product Documentation
Unipro 3.5 Process Control 1 Aug. 1997
To Exit the Editor Without Saving the Program
1. Press [Setpt ]at any time, the edited program is lost (the
copy in non-volatile memory is unchanged)
To Exit the Editor Saving the Program
1. Edit through step 19 as required, inserting NOP's
wherever no operation is to be executed
2. Press [ENTER]
3. Select the program number in the SET display using the
[arrow keys] until the desired program number is being displayed
(SAVE / 0000)
4. Press [ENTER], the program stored in that location
previously is now lost (SAVE / Done)
CHANGING PARAMETERS
All of the UNIPRO parameters, program numbers,
OPCODES, and data values can be altered using the following
procedure:
Press [Pr. Fact. / Ctrl. Param.]. The word
MENU will appear in the PROCESS window.
The Parameter group will appear in the SET
window. Press [ENTER]. The symbol for the
parameter is displayed in the PROCESS window
while the current alterable data is shown in the
SET window. The flashing character is the one
that can be altered.
Use the [LEFT ARROW] or [RIGHT ARROW]
keys to select the character to be altered.
Once the character to be changed is flashing, use
the [UP ARROW] or [DOWN ARROW] keys to
select the desired number or symbol.