Micronics M54E2 PCI/EISA - Manual (Page 20)

Section 3: Installing the M54E2
M54E2 System Board Manual
Installing the M54E2, System
Memory, CPUs and Peripherals
This section explains how to install the M54E2 system board, SIMMs,
CPUs and peripherals.
WARNING:
Before installing or removing any peripherals or components, make
sure you have a clear work space and that you adhere to all anti-static
precautions described on page 2-1.
Micronics recommends only trained technicians install and configure
the system board. Damage which occurs to the board while adding or
removing peripherals or components may void the warranty.
If problems arise while installing peripherals, contact the computer
dealer where you purchased the peripheral or Micronics’ Technical
Support Department.
3-1
3