Micronics M54E2 PCI/EISA - Manual (Page 35)

Section 4: BIOS Setup Utility
M54E2 System Board Manual
Multiple-Sector Transfers
This category determines the number of sectors per block for multiple sector
transfers. The options are Disabled (default), 2 Sectors, 4 Sectors, 8 Sectors,
and 16 Sectors.
IDE Transfer Mode
This category provides the transfer mode for the IDE controller. The default
setting is Standard mode.
32-Bit I/O
This category allows you to enable the 32-bit I/O function of the IDE control-
ler. Select Disabled if your drive will not run at this speed. The default setting
is Disabled.
LBA Mode Control
Enable LBA (Logical Block Addressing) to support IDE drives larger than
528MB in size. The default setting is Disabled.
4 - 6