Micronics M54E2 PCI/EISA - Manual (Page 40)

Section 4: BIOS Setup Utility
M54E2 System Board Manual
Security Screen
The Security Screen (Figure 4-7) controls access to the computer. The
security screen allows for settings of two passwords. The Supervisor Pass-
word allows access to the system and Setup. The User Password will allow
access to the system, but not to all Setup features.
Figure 4-7 Security Setup Screen
Supervisor Password is
If a Supervisor Password has been set up for the system, it will read “Supervi-
sor Password is ENABLED.” If the password has not been set up, it will be
disabled (default).
User Password is
If a User Password has been set up for the system, it will read “User Password
is ENABLED.” If the password has not been set up, it will be disabled
(default).
Set Supervisor Password
Press the <Enter> key to enter the Supervisor Password submenu (Figure 2-
8).
4 - 1 1