Micronics M54E2 PCI/EISA - Manual (Page 38)

Section 4: BIOS Setup Utility
M54E2 System Board Manual
Post Errors
When enabled, this category allows the system to display the “Press <F1> to
resume, <F2> to SETUP” and pause if errors occur during boot. If disabled,
the system will ignore any errors and will always attempt to boot.
Numlock at Boot
This selection activates Numlock upon boot. Setting this to Auto activates
Numlock if the BIOS detects a numeric keyboard. It may also be turned ON
or OFF.
Integrated Peripherals
The Integrated Peripherals submenu (Figure 4-6) allows you to individually
enable or modify the drives, I/O ports, and other settings. Use the up and
down arrow keys <
↑
/
↓
> to select a category and the plus and minus keys
<+/-> to change the settings.
Figure 4-6: Integrated Peripherals Submenu
COM Port A
COM Port A may be set for COM1 (default), COM2, COM3, COM4 or may
be disabled.
4 - 9