Activating the rg2200, Changing channels, Controlling tv volume – Motorola RG2200 User Manual
Page 22
22
A
CTIVATING
THE
RG2200
The RG2200 doesn’t have an on/off button. However, if your NSP has activated the “One Touch Power” option, the
RG2200 can be put into a power saving mode when you use the POWER button on the remote to turn the TV off. It is reac-
tivated when the TV is turned on using the same button.
C
HANGING
C
HANNELS
To change the channel using the remote control buttons do one of the following:
•
Press up or down on the channel key (labeled CHAN or Ch).
•
Enter the channel number on the number key pad and press Select.
•
Enter the channel number on the number key pad and wait 5 seconds; the RG2200 will go to the channel entered.
To change the channel using the RG2200 front panel buttons:
•
Press the up or down key on the front panel.
C
ONTROLLING
TV V
OLUME
To raise or lower the volume on your TV using your remote control:
1.
Press up or down on the VOL key.