Determining the gateway id – Motorola RG2200 User Manual
Page 34
Advertising
34
D
ETERMINING
THE
G
ATEWAY
ID
Check,
”Write Your Remote Control and Other IDs Here” on page 13
. Your NSP may have already recorded the Gateway’s
ID on this page or on the back of the remote. If the ID has not been recorded, perform the following steps.
1.
Press the SETUP button on the front panel of the RG2200. (See
“Using Your RG2200” on page 16
for an illustration
and description of this button and other buttons on the RG2200s.)
The Gateway Menu screen will be displayed on your TV.
2.
Use the down key on your remote control to move down to Remote Control Setup.
3.
Press SELECT on your RG2200 or your remote control.
Gateway Menu
SEP 3 3:22 PM
Use
and
, then press SELECT
Use EXIT to return to program viewing
TV Setup
Remote Control Setup
Exit
Advertising