Troubleshooting, Roubleshooting – Motorola RG2200 User Manual
Page 69
69
T
ROUBLESHOOTING
This section describes what to do if your system is not working correctly. Study the following tables to find possible causes
and solutions to the problem.
Problem
Possible Cause
Try This
Remote doesn’t work
Dead batteries.
Change the batteries in your remote according to the instructions on page
Obstruction between the remote
and the RG2200 or IR Transmit-
ter.
Make sure that nothing is on or blocking a clear line of sight between the RG2200 and
the remote.
Remote will not accept pro-
gramming changes
Weak batteries.
Replace batteries and reprogram.
Remote will not operate at
secondary viewing locations
Weak or dead batteries.
Replace batteries.
Using wrong remote for that TV.
Check remote label to be sure you are using correct remote control.
Obstruction between the remote
and the TV.
Make sure that nothing is on or blocking a clear line of sight between the TV and the
remote.
No sound
MUTE is pressed on the remote
control.
Press MUTE on the remote to restore volume level.
TV code not programmed.
Refer to
“Programming the TV Code” on page 42
.