Verifying the tv (rf) setting, Tv (rf) s – Motorola RG2200 User Manual
Page 47
47
V
ERIFYING
THE
TV (RF) S
ETTING
1.
Press SETUP button on the RG2200 front panel.
The Gateway Menu is displayed.
2.
Use the down or up key on the RG2200 or the remote control to scroll to TV Setup.
3.
Press SELECT.
The TV Setup Menu will be displayed on your TV.
4.
Use the down or up key on the remote control to highlight the TV you want to examine.
5.
Press SELECT.
For example, if you selected TV1, the Setup 1 menu will be dis-
played. The selected RF setting is displayed, in this case chan-
nel 6 has been selected.
Note:
Your Network Service Provider sets up the initial RF channel
settings and your TV to provide program channels by programming
the output to a specific RF channel. If you need to change the RF
channel settings, it is recommended that you call your NSP to do
this for you.
6.
Press the EXIT button twice to exit back to the program screen.
Setup 1
SEP 3 3:22 PM
TV (RF) Channel
Use
and
to select item
Use EXIT to return to previous menu
Use
and
to change value
Secondary Audio
Display Language
Emergency Alert Device Support
6
Spanish
English
OFF
TV
4:3