Metrologic Instruments MS7320 User Manual
Page 30
Advertising
26
F
LEX
S
TAND
I
NSTALLATION
2. Secure the base plate to the counter and attach the flex pole assembly.
Slide the flex cover(s)* over the flex pole assembly.
Figure
23: Pole Assembly
Figure 24: Cover Assembly
3. Remove the scanner’s cable cover if it was previously installed.
Figure 25: Cable Cover Removal
4. Pull the tab on the scanner’s pedestal to release the lock. Slide the pedestal
off the scanner.
Figure 26: Pedestal Removal
Advertising